-
Bioplastics
Bioplastics refer to plastics produced by microorganisms based on natural substances such as starch. It is renewable and therefore environmentally friendly. Relevant research has been carried out in many countries. Prospect A report points out that the global bioplastics market will grow rapidly, with an expected average annual growth rate of 8%-10%, increasing from US$1…
-
General Plastic
People tend to call some plastic varieties with large output, low price, wide range of uses and wide influence as general plastics. Its connotation often changes with the times and the development of science and technology. Important general plastics include polyethylene, polypropylene, polyvinyl chloride, polystyrene and other varieties. Important general purpose plastics General plastics mainly…
-
Foam Plastic
Foam plastic is a type of polymer material formed by a large number of gas micropores dispersed in solid plastic. It has the characteristics of light weight, heat insulation, sound absorption, shock absorption, etc., and its dielectric properties are better than the matrix resin, and it has a wide range of uses. Almost all kinds…
-
Plastic Additives
Plastic additives, also called plastic additives, are some compounds that must be added when polymers ( synthetic resins ) are molded to improve their processing properties or to improve the performance of the resin itself. For example, plasticizers are added in order to lower the molding temperature of polyvinyl chloride resin and make the products…
-
Vacuum Forming (Blister)
A plastic processing technology. The main principle is to heat and soften a flat hard plastic sheet, then vacuum it to the surface of the mold, and then cool it into shape. Vacuum Forming, often called blister, is a plastic processing technology. The main principle is to heat a flat hard plastic sheet to soften…
-
Closed plastic mixing machine
The closed plastic mixing machine is referred to as the internal mixer. The main component of the internal mixer is the internal mixing chamber, also called the plasticizing chamber. The upper part is the feeding device and the lower part is the unloading device port. There is a bolt on the upper and lower parts;…
