-
Masterbatch
Masterbatch or plastic masterbatch, is a plastic processing aid developed in the 1980s. It is composed of excessive amounts of chemical additives, carrier resins and dispersants. Masterbatch is an aggregate obtained by evenly loading a super-normal amount of pigments (dyes) in resin. Masterbatch refers to the process of plastic processing and molding. For the convenience…
-
Color Masterbatch
Color MasterBatch, also called color species. It is a new type of special colorant for polymer materials, also known as Pigment Preparation. Masterbatch is mainly used in plastics. Color masterbatch is composed of three basic elements: pigment or dye, carrier and additive. It is an aggregate made by evenly loading a super-normal amount of pigment…
-
Bioplastics
Bioplastics refer to plastics produced by microorganisms based on natural substances such as starch. It is renewable and therefore environmentally friendly. Relevant research has been carried out in many countries. Prospect A report points out that the global bioplastics market will grow rapidly, with an expected average annual growth rate of 8%-10%, increasing from US$1…
-
General Plastic
People tend to call some plastic varieties with large output, low price, wide range of uses and wide influence as general plastics. Its connotation often changes with the times and the development of science and technology. Important general plastics include polyethylene, polypropylene, polyvinyl chloride, polystyrene and other varieties. Important general purpose plastics General plastics mainly…
-
Foam Plastic
Foam plastic is a type of polymer material formed by a large number of gas micropores dispersed in solid plastic. It has the characteristics of light weight, heat insulation, sound absorption, shock absorption, etc., and its dielectric properties are better than the matrix resin, and it has a wide range of uses. Almost all kinds…
-
Plastic Additives
Plastic additives, also called plastic additives, are some compounds that must be added when polymers ( synthetic resins ) are molded to improve their processing properties or to improve the performance of the resin itself. For example, plasticizers are added in order to lower the molding temperature of polyvinyl chloride resin and make the products…
