The hard plastic washing system are designed for recycling post-consumer hard materials like bottles, injection waste, or rigid materials. The hard plastic washing system produce uniform plastic flakes with high purity and low moisture level.

Applicable Materials

Waste rigid plastic material can be in many different conditions in terms of moisture, contamination, and rigid type, basically divided into the following families: Bottles, chemical drums, HDPE milk bottles, industrial pipes, WEEE Waste Electrical Equipment, ABS recycling, etc.

Raw materials: Bottles, chemical drums, HDPE milk bottles, industrial pipes, WEEE Waste Electrical Equipment, ABS recycling, rigid plastic materials, etc.

Processing Flow

After shredding, crushing, washing, and drying. The finished product could be fed into pelletizing systems to produce plastic pellets and create a bigger profit.

Technical Characteristics

Model	Capacity (kg/h)	Installation power (kw)	Space (m2)	Compressed air (m3/min)	Water (m3)
PE/PP500	500	98	500	0.5	2
PE/PP1000	1000	150	700	0.5	2
PE/PP2000	2000	230	1000	0.5	3

Advantages

• Designed for rigid plastics with a wall thickness ranging from 1-25mm.
• Minimizes the recycling water flow rate and evaporation losses.
• Wear resistant design to maximize the consistent running of the system and minimize operational costs.
• High speed washing system with corresponding speed according to material type.
• The under-water force-washing paddle of the washing tank maximizes the washing efficiency.
• Mechanical and thermal drying system minimizes the moisture of the end product.
• High speed washing and drying can be set at suitable intensity to avoid over friction.
• System automation to ensure components actions are linked, system capacity is maximized, and system protected against interfering material.