Features
Smart intelligent control.
Lower energy consumption, higher production.
High safety protection, protect personal safe and equipment safe.
Working Principle
- Feeding 1 is automatic according to customer requirements.
- Unit 2 the material is cut, mixed, heated, dried, degassed, densified and buffered.
- Next, the tangentially connected extruder is fi lled continuously with hot, pre-compacted material. In the extruder screw 3 the material is plasticised, homogenised and then cleaned in the fully automatic self-cleaning filter 4.
- The prepared and cleaned melt then goes via the melt pump 5 directly to the co-rotating, self-cleaning twin-screw extruder 6. With its excellent mixing and gas removal properties, this flexible part of the system can handle all compounding tasks.
- Besides the dosing of a wide variety of additives, high amounts of fillers and reinforcing agents 7 can be admixed. In the degassing zone 8 the compounded melt is degassed and moves to the respective tool 9 (e.g. POLYTEC hot die face pelletising system)
Technical Characteristics
| Mode | Output capacity in kg/h* | Remark |
| PTC100-65 | 300 | Examples of additives, fillers and reinforcing agents suitable for admixing |
| PTC130-75 | 500 | |
| PTC185-95 | 800-1000 |
Depending on material properties of the polymer (moisture content, print, degree of contamination, etc.) type and properties of the filling/reinforcing agent and the degree of filling.
Raw materials
Products
Factory informations
Wanplas Group’s Polyretec factory focuses on the R&D and manufacturing of complete set of waste plastic recycling systems. The factory have provided customers over 30 countries through high-quality customized solutions, professional real-time technology and after-sales service.
